Dolphin is a GameCube and Wii emulator with high compatibility across the majority of titles for both platforms. It was first developed as closed source in 2003, and as open source since 2008.
When Dolphin went open-source in 2008, it was released under the GPLv2 license. However it has since been relicensed to GPLv2+. According to the license, you may use Dolphin and its source code for any purpose, but distributing Dolphin requires that the source code be released and attribution given. For more details, see the license document.
Over 200 people have worked hard over the years to create Dolphin. The list of contributors can be found on GitHub.
Dolphin is not affiliated with Nintendo in any way.
Dolphin is a cross-platform emulator that runs on Windows (10 and newer), Linux, macOS (10.13 High Sierra and up), and Android (5.0 and above). Other Unix-like systems (such as FreeBSD) may work but are not officially supported. Operating systems are required to be 64-bit to run Dolphin.
Dolphin is a dual core application that relies upon IPC (Instructions Per Clock) and clockspeed for performance. Additional cores will not make Dolphin go any faster, though an "extra" core that Dolphin isn’t using may help slightly by keeping background tasks from using the same cores as Dolphin.
Accordingly, the perfect CPU for Dolphin has high IPC, a high clock rate, and four cores or more. With four cores, Dolphin has two cores for the main emulation threads, a third core for other tasks, and another core for the operating system and background tasks to run without taking resources from the emulator.
Newer processors are generally better than older ones, thanks to the increased IPC that comes with newer architectures.
Intel: Within a single generation of processors, the difference between i5 and i7 (hyperthreading/extra core counts) don't affect Dolphin very much. Newer generations will give higher performance per clock, and K series processors will allow for overclocking to gain extra performance. Be wary of U and Y series processors, as their reduced clockspeeds often struggle with Dolphin's workload.
AMD: Dolphin's workload didn't match the strengths of AMD processors until the Ryzen line. As such, we can only recommend Ryzen or newer for Dolphin among AMD's line of processors.
For more details, such as specific CPU recommendations, CPU comparisons, or what hardware you should purchase to get playable speeds on a specific game, please ask on our Hardware Forum before purchasing.
Note: For more information regarding CPU performance, please check out this handy benchmark that contains results from tons of users. It's important to remember that Dolphin is a console emulator with tons of optimizations and features. But, in the end, it does what the game instructs it to do. Some games only use features that are easy to emulate, and thus will run full-speed on just about any computer that supports Dolphin. Meanwhile, others struggle to run full speed at all times on even the most powerful of processors.
Choosing a GPU for Dolphin is a fairly simple task. The more powerful the graphics card, the more pixels and enhancements you can throw at it before you’ll see slowdown. However, the biggest thing to watch for is making sure the GPU supports DirectX11.1 and OpenGL 4.4. Dolphin emulates a console that functions very differently from a traditional PC, and uses the latest D3D and OGL features to reduce overhead. If you do not have those extensions, performance will suffer.
NVIDIA: Any modern mid-range or better NVIDIA GPU will be able to play Dolphin in HD resolutions with Ubershaders quite well. Old (6+ years) and/or low end GPUs may struggle, and are not recommended.
AMD: Any modern mid-range or better AMD GPU will perform well in Dolphin with Ubershaders. AMD generally favors D3D over OpenGL, so we recommend D3D for these GPUs. Old (6+ years) and/or low end GPUs may struggle, and are not recommended.
Intel: Iris Pro iGPUs will handle Dolphin well in D3D in Windows, though there are driver issues with the other graphics backends on that OS. A full fledged discrete graphics card is still highly recommended. IGPs older than the HD4000 are not supported.
Aconséyense 2GB o más. La velocidá o la cantidá de RAM nun afeuta xeneralmente a la velocidá d'emulación.
The latest stable version of Dolphin is a good choice to start with: it works with a lot of games and is well tested. Development versions have the latest fixes and optimizations, but their constantly changing nature means that little testing has been done on them and unknown bugs may appear.
Our buildbot provides each revision of Dolphin in four variants on the main site:
We no longer distribute Linux builds on our website, requiring users to build from source. Please see our Building Dolphin on Linux guide for instructions.
Dolphin does not support 32-bit operating systems. To check if your version of Windows is compatible with 64-bit applications, open the Start Menu, right click on Computer and select the Properties option. A window should appear, showing "64-bit operating system" as the System type if your Windows version can run Dolphin x64. If you are running a 32-bit operating system, you should upgrade to a 64-bit version to better utilize the abilities of your hardware.
On Android, Dolphin also requires 64-bit (ARMv8 AArch64). To see if your Android phone has the necessary requirements, simply run the APK, and Dolphin will alert you.
Do note that sometimes the buildbot is not always around for a build, and various revisions may not have built correctly for all OSes. If this occurs, it will be fixed in a short time.
Dolphin now uses Visual Studio C++ 2019 for Windows compiling. Windows x86-64 users must have the latest x64 Visual C++ 2015, 2017, and 2019 runtime installed in order to use Dolphin. If you ever encounter a MSVCP__.dll or vcruntime__.dll error, please download the latest Visual C++ runtime version from Microsoft's website (direct link).
Also, remember to extract Dolphin's files from the archive to a folder on your computer instead of running Dolphin directly from inside the archive.
Update and/or repair DirectX or reinstall the Xbox 360 Controller Drivers.
This type of error usually only happens when trying to run a 64 bit Dolphin build, with 32 bit builds working perfectly fine. When people see one of the error messages about vcomp100.dll or xinput1_3.dll missing they often download 32 bit builds of these files from the internet and expect them to work fine with 64 bit applications.
If you're suffering from this issue, make sure to delete any manually downloaded DLL files which are stored in your system paths and in the path where the Dolphin binary is stored and reinstall them with the proper runtime installers instead. Refer to the two questions above for further information.
Laptops and modern GPUs use a variety of tricks to reduce their power consumption and overall temperature. Underclocking, reducing voltages, using integrated instead of discrete graphics, etc. Sometimes these tricks get in the way of Dolphin, and the system needs a little help to use its maximum capabilities with the emulator. Use the links below for assistance.
Make sure that the emulated GameCube port 2 is configured as a Standard Controller in the GameCube tab of the main configuration window. If the pad still does not work, check that your game can actually use a second GameCube controller.
Sometimes when you're running a game you may run into occasions where Dolphin is unable to run full-speed. Because the emulated console isn't running full-speed, it doesn't output as much audio as Dolphin needs. As such there end up being gaps in the audio, commonly referred to as audio stuttering by users.
This is not actually an audio issue, but a performance issue. Audio stuttering can be avoided by running Dolphin full-speed, or, in the latest development builds, activating time-stretched audio. Time-stretched audio will "stretch" the currently output audio over the gaps, allowing the game to sound more natural at the cost of some audio latency.
Even with a decade of work, Dolphin isn't a perfect emulator. This means you may encounter various issues that range from minor sound or graphics defects to game breaking errors and crashes. In order to provide users with as much information as possible, the Dolphin website hosts a wiki with thousands of pages dedicated to games and various features of the emulator. Game Specific pages often list problems a game has, solutions, and what settings are needed to make it run as accurately as possible.
If you find a bug in a game that isn't listed on the Wiki, please checkout the issue tracker and see if it is reported there. If it isn't, feel free to report the bug you found so that the developers are aware of the issue. Be aware, one of the rules you must follow before reporting an issue is make sure the issue isn't already fixed on the latest development version.
Dolphin is configured to run as fast as possible by default. However, for some games, that will cause a lot of problems, and they need more accurate and more demanding settings to run properly. For user convenience, many games have had these settings preconfigured in the "GameINI", a file with custom settings for each game.
Note: The below is only relevant to Dolphin versions before 5.0-4171
By opening the graphics menu, you are overriding the GameINI default settings and instead using the settings within the graphics menu, which will be the global defaults or whatever you last set them to. If you are playing a game that needs accurate but demanding settings, opening the graphics menu will disable those settings and result in a speed up. However, you will then be subject to the glitches and problems the GameINI settings were protecting you from.
See the Dolphin Wiki for details on what games needs which settings to run correctly and why.
The build instructions are available on GitHub:
Builds are compiled for every development version of Dolphin and are available on the download page.
Most of the Dolphin developers read the "Development discussion" forum. Posting a thread there might be a good idea to get some feedback from developers but also from users.
Dolphin developers also communicate via IRC, which is better for instant discussion than a forum. Join us on
#dolphin-emu @ irc.libera.chat.
Even if your idea is very good, note that developers are doing their work on Dolphin on their free time and don't necessarily have the time to implement everything people suggest. If you can, implementing a first draft of your idea might be a good way to get developers attention.
CPUs do not work that way.
Every core on a CPU runs in parallel. Two tasks can run very well in parallel if they don't need to communicate often or to run at the exact same speed. For example, compressing files can be run on separate cores because compressing one file and compressing another file are two completely independent tasks, which do not need to communicate.
In Dolphin, the only demanding tasks that can run well in parallel are the CPU, the GPU and the DSP. Breaking up any of these tasks into smaller tasks just to run it on more cores is very likely to make the program slower. That's why Dolphin only runs on 3 cores and won't use all of your 4 or 6 cores CPU.
While it's true the GameCube and Wii hardware is a lot slower than what you need to emulate the console using Dolphin, the hardware found in these consoles is also very different from what you can find in a gaming PC. For example:
Instead of an Intel or AMD x86 CPU, GameCube and Wii use an IBM PowerPC CPU. Games are programmed for this CPU: when emulating, every basic instruction a game runs needs to be translated to something a PC can execute. Depending on the instruction, this can take from 2x to 100x clock cycles, which explains why you need more than a 486MHz CPU to emulate a GameCube.
The RAM in these consoles is SRAM, smaller but faster than the SDRAM used in a PC. It is also shared between CPU and GPU, which makes operations like texture uploads (CPU memory to GPU memory) or framebuffer copies (GPU memory to CPU memory) a lot less demanding than they are on a PC.
The GPU is not using shaders: every graphics effect and every computation done by the game is executed directly by the hardware without an intermediate programming language. This does not match how a PC GPU works at all. Dolphin uses shaders on the PC GPU to translate what the GC GPU can do directly in hardware, causing it to run a lot slower.
This list is not exhaustive but should give you a good idea of what exactly makes emulation require a powerful computer.
Short answer: You don't. Buy games and dump them with a Wii.
Long answer: Downloading commercial games is illegal and thus strongly frowned upon by the Dolphin developers. To prevent legal issues, this includes gray areas like downloading games which you purchased earlier. You don't necessarily need to own a gaming console by yourself because you can buy a game disc and dump them with a friend's console. On the other hand, copying a friend's game dump is considered illegal again.
For dumping games with a Wii, you'll want to install the homebrew channel and run an application like CleanRip.
Dolphin supports playing games dumped in the following formats:
Note that WBFS and CISO are lossy compression formats: they remove some of the unused information stored on the discs to make files smaller. As such, we recommend you try dumping your games as GCM/ISO if you get issues using a WBFS dump.